|
CFTC RULE
4.41 - HYPOTHETICAL OR SIMULATED PERFORMANCE RESULTS
HAVE CERTAIN LIMITATIONS. UNLIKE AN ACTUAL
PERFORMANCE RECORD, SIMULATED RESULTS DO NOT
REPRESENT ACTUAL TRADING. ALSO, SINCE THE TRADES
HAVE NOT BEEN EXECUTED, THE RESULTS MAY HAVE
UNDER-OR-OVER COMPENSATED FOR THE IMPACT, IF ANY, OF
CERTAIN MARKET FACTORS, SUCH AS LACK OF LIQUIDITY.
NO REPRESENTATION IS BEING MADE THAT ANY ACCOUNT
WILL OR IS LIKELY TO ACHIEVE PROFIT OR LOSSES
SIMILAR TO THOSE SHOWN.
Trading Forex on margin carries a high level of risk, and may not be suitable for all investors. Before deciding to trade the foreign exchange, you should carefully consider your investment objectives, level of experience, and risk appetite. Past performances are not indicative of future results, which can vary due to market volatility. The possibility exists that you could sustain a loss of some or all of your initial investment and therefore you should not invest money that you cannot afford to lose. You should be aware of all the risks associated with foreign exchange trading, and seek advice from an independent financial advisor if you have any doubts.
All information on this website is for educational
purposes only and is not intended to provide
financial advice. Any statements about profits or
income, expressed or implied, does not represent a
guarantee. Your actual trading may result in losses
as no trading system is guaranteed. You accept full
responsibilities for your actions, trades, profit or
loss, and agree to hold the
ForexNewsTradingAcademy.com
team and any authorized distributors of this
information harmless in any and all ways.
Copyright © 2011 ForexNewsTradingAcademy.com. All Rights Reserved
|
{ 318 comments… read them below or add one }
Hi Henry, I subscribed to CSM when you first started but was not familiar with metatrader, and was just not able to download CSM so never got a chance to try. I have an account with ufxbank.com can cms be downloaded onto this platform?
Would appreciate your response. Thanks
CSM is now platform independent. It could work practically with anything.
The meter looks nice. I have seen a few meters like dukascopys daily one, (not much good). the best one puts it on a graph. But you have to subscribe to it. I don’t know if you can change the time factor for different trading styles. Of course you still need to do a lot of back or forward testing to develop a stratage that is profitable with any meter. Otherwise, like any tool, you will just misuse it. Like the guy with a nail gun that shot himself in the head. (and lived). I will try to review the video. Thank you
Hi Henry,
I attended your webinar, but was unable to click onto the final link to join the FNTA.
Please can you send me the link.
Thanks
I have sent you an email. Please check your junk mail box.
Hi Henry,
I see the news scrolling across the bottom, can see the news countdown on the right extension, I see the time zones light up and can even see the ads….
where the numbers should be are just blank blue boxes.
my regional settings are set to US and under customize numbers the decimal is a period and not a comma.
Is there anything I can do or just need to wait for the fix?
Thank ya,
E.
Hi Henry
I downloaded CSM 3.0 and it looks fine, thnak you very much.
The only issue is that all currencies figures keep showing a blue background, excluding any other color.
Would you have any ide
sure, I will release an update tomorrow that will fix this issue. This has to do with French language that uses the comma as decimal and period as thousand separators. The new update is working fine and it will be ready tomorrow.
Hi Henry,
Awesome one, however the system gets a bit slow once I start to run the CSM.
Thanx.
really? I havent really noticed it. What kind of hardware do you have?
Hi Henry:)
Just want to tell you that simply i changed my regional settings as you mentioned and the CSM now works perfetclty!!!THANKS:)
Hi Henry,
I’ve been following your news trading for quite a while now and found it very helpful, the new CSM is a big step forward . Really looking forward to the webinar tonight. Thanks
Hi Henry, the numbers are correct but i have the following problems:
the colors do not change,they are always red
the news window is always empty,not indicating the next release
alarms also wont work for me..
i tried both in my pc and laptop(windows xp and windows 7) and both react the same way
any ideas of how i could fix this?
Its the regional setting with numbers. I guess if your decimal is a comma instead of a period, it messes up the calculation.
I will release a fix soon for this.
Great:)thanks for your quick reply Henry:)
Thanks Henry, this is avery generous gift you have given free to your followers.
dear mr henry,
i’ve got problem on the alarm setting…can you brief a bit and how its works?
especially on the ‘operator’ section…pls guide me…tqvm…
I will do that at the webinar. Then I will do a video on it in the future. Thanks.
Hi henry
I had downloaded CSM 3.0 today. august, 29, 2011 (EST 8.30 AM) Based on the currency strength,
I had been long (bought) NZDUSD @ 0.84459 with a stop loss and limit. Is my action and interpretation of the currency strength is correct or i have made a mistake. The currency strength numbers at that time was as follows: USD: 3.30 & NZD: 7.00
that should be correct, but of course, remember when market open/close, you could see volatility. But I believe if you hold on to the trade for say… 12 to 24 hours, you will definitely see the effect.
Hi henry. great man you know the best. this software help to trade with confidence and to get right on profit. Henry can you add gold and silver to this version. i have just got 15 pips with its help. Thank you. Thank you a lot.
Since GOLD is pegged to USD, there is no point adding gold or silver for that matter. The key benefit with the meter is the its ability to see the discrepancies amongst different crosses, but with an instrument that has no crosses, it won’t work, in my opinion.
Thank you for the reply
Used the CSM 3.0 for the first time today just kinda watched it’s readings. Was watching the AUDUSD after the open today. After watching the 7 best uses video I can see how waiting for a pull back on the CSM worked great! Got in a long position AUDUSD at 1.0570 and I’m up almost 60 pips.
Good job…
I want sincerely thank you from the bottom of my heart, CSM 2.0 has really being very helpful tool to my day to day trades, now you have come out with yet another powerful CSM 3.0. thank you a lot for giving young trades like us such a wonderful privileges to be among those that would profits in a large and risk forex market. Thank you once more and remain blessed.
Hi Heny,
I can’t see where the download link is for the CSM 3.0, could you please help.
Thanks
Roman
Hi Henry,
In your E-book on news trading you have detailed instructions on how to set up the currency strength meter on meta-trader 4. Is that for the New version 3.0 or is it for the old version 2.0?
Diana
That was the old version. The new version does not need MT4 or any setup at all.
Henry ,I have been following you for along –I,am an OLD GUY –not to computer knowledge — so your meter has saved me a lot of time and frustration .
I am looking forward to sign up a bunch of retired people who I have been trying to join our forces and enter the market with your help
THANKS
Good luck to you Phil and the other retired people your trying to help, maybe your get back some of the money banks have taken off working people all there life’s but you can take back via forex tradeing !!, TIP for you. track forex / banks on 15/30/45/60/4h charts to see what they are up to and befor any news comes out just see if the dir/trend changes because much of the time they have news info hrs befor we get IT!
that’s just a myth… news aren’t leaked ahead of time, just good research.
Sir, Let me thank you first for every thing. I had wanted to ask of your faith but the policy of access to your products implies you simply have faith in GOD. And the way I see it, you are a gift of God to the forex world. You are a window or gate to genuine FOREX FREEDOM. It does not matter one’s back ground or forex education or experience, an encounter with you or your products leads to certain revelation that has the ability to propel any trader to the next level. My sincere prayer is for all beneficiaries to see you as role model. That will translate to greater number of Henry like traders. And it may lead to tilt in prortion of successful vs struggling traders in the forex market. By that time it could mean mission accomplished. Thank you and may the Living God who ordained you continue to keep and protect you.
Henry Liu, I’m have problems down loading CSM 3.0 .msi is not a format my mac understands. any ideas how to get it on my mac?
Willis
I am not sure because this is designed for Windows. However, if you setup your MAC to work with Windows, and I know it could be done, then the meter will work too.
Sounds very interesting — looking forward to using the curreny strenght meter.
Hi Henry
Great, many thanks
I changed broker a few weeks ago and could not get your previous version to work with my new MT4 platform. I am really please that this version works independently. I’ve just installed it and it looks great. I really missed not having it for a few weeks while trading. Great innovation to incorporate alarms, news and open markets. Can’t wait to see it in action when the market re-open on Sunday night.
Many thanks for your generous gift
Kind thoughts
Looks good, lets see what happens when the markets open
I have Norton Anti-Virus installed on my computer. When I tried to download the CSM 3.0 I got a message from Norton saying : “You are one of the very first Norton Users to download this File. We recommend not using this file until more is known about it”. I see, however, that others have downloaded CSM 3.0 and are happy. What do you think, should I ignore this Norton message and go ahead and download?
Yes, norton sometimes is a bit overzealous. Go ahead and download it, it’s fine.
Can’t download the CSM v3 because I have Windows 2000 OS.
Oh well, thanks for nothing
I’ve never tested on 2000… but it should work, what seems to be the problem?
Microsoft .NET Framework 3.5 Service Pack 1 requires at least Windows XP or higher OS which is required for installing the software. In other words, I have to upgrade my OS just to use this software!
Hi Henry,
About an error box giving “there is some problem with connection”
After closing the CSM “register your account” box, a box pops up saying “This program requires a missing windows component”: This program requires flash.ocx, which is no longer included in this version of windows.
My Laptop runs Windows 7, I updated my adobe flash player to the newest adobe 10 version but still same problem appearing with CSM 3.0
Do you think that I must update adobe to the adobe11 beta version because my windows run as 64bit OS & adobe10 mostly work with the 32bit OS and does CSM 3.0 rely on adobe for its work, so here’s the main problem or maybe after the market opens the problem would be solved?
I appreciate your help
This problem seems to be related depending on your Windows update version, I am still investigating over it. I will provide a fix for it soon. Please bear with me. You can upgrade to beta 11, but I don’t think it is the problem.
Hi Henry thanks for the new update and one interesting thing about this is that i don’t need to get an MT before it work and also the news alert system for news update.
wow cool feature thanks for all your efforts towards making Forex trading easier
pls i downloaded the cms v3.0 but it’s not read just showing blue screen pls wat ll i do
Please be a bit specific, no idea what is the problem.
henry, been using 2.0 for the past 6 months. great tool… have watched new video twice but still have no download link after…. i am in malaysia, but would not think that would make a difference i downloaded 2.0 in same location.. thanks
Ben
Here is the link:
https://s3.amazonaws.com/csmeter/Currency+Strength+Meter.msi
Hi Henry,
I am an active member of your 10k to 1m program and would love to try the CSM version 3.0 You are a decent human being GOD Bless you and your team Keep up the good work Thks and rgds Alnoor
Where is the download link?
im cant trade whitout your meter,,!!!!!
Hi
No feed of info for each currency. Just blue box under each currency which is blank? I have reinstalled etc with same result.
What is not working?
What OS are you running?
What Antivirus program do you have?
What regional language is on your pC?
Send them all to me at henry [at] newsprofiteer dot com
Henry, you are the best. Thanks for the CSM, I have just downloaded it and will use it in my Demo Account. I liked the CSM video, very impressive. I am looking forward for your Webinar on Monday and hope to learn more things from you. Thanks again Henry and keep up the good work.
Henry, Are there instructions some place I can read about exactly how to use the CSM 3.0?
I found the video 7 best uses of the CSM thanks!!
http://www.currencystrengthmeter.com/76/7-best-uses-to-profit-from-currency-strength-meter/
Yes, goto http://www.currencystrengthmeter.com and look for the 7-best uses video.
Just AWESOME !! Thanks for the new CSM Henry it is so great to just have the internet connection to run it. I dont use MT4 and could not use the old CSM. I just downloaded the CSM 3.0 and can not wait for the market to open Sunday afternoon. Thanks again !! Great job.!!
Your the best.!!
Hi Henry,
I download the CSM 3.0, but after cliking its desktop icon then filling the “register your account” & clicking the box, it gives me an error box saying that “there is some problem with connection”
“Register your account” must be done during market open or is this problem due to another factor?
Thanks for the new CSM, looking forward to use it.
Try it again once the market is open. We are working on the backend taking advantage of the market close.
I just downloaded and registered no problems at all and the market is closed. worked like a charm.
I think a very useful tool and I think their contributions are invaluable.
thanks for sharing all this
One question about csm 3 how powerful does the computer need to be to run the program as I don’t wish it to freeze my screen regularily.
The requirement is relatively low. You don’t need a powerful one as the entire framework has been changed. It does not need communication with MT4, which was the primary reason for the delay in the first place for the older version.
Hi Henry
It’s look better than ever, I’ve been using the ver. 2.0 and this new version looks great. Thank you very much for your efford to help us to make better trades.
It is a good work, the most useful in this meter is time alert for a High Impact news
Thanks
Henry,
you are simply fantastic, i just finished watching your net currency strength meter and i think this is just this is just too good to be free. Henry why dont you just develop a software that will trade the news either ways. I think its possible, It will trail the market whichever way it goes. And it will be a win win situation.
of your customers will buy
Thanks
Maybe in the future, but so far nothing can replace a real human.
Hi Henry,
I have so much stayed with technical trading that i dont seem to understand your news details. Some times you say buy at +5 and sell at -2 could you please explain further for the benefit of those who are new to news trading.
Yes, please read my article on Forex News Trading for more guidance.
http://www.henryliuforex.com/forex-news-trading-fundamental-news-in-currency-trading/
and
http://www.henryliuforex.com/forex-news/
and if you want an entire free course on News trading, signup here:
http://www.newsprofiteer.com/mentoring/
Thanks Henry.
I am looking forward to trying this to keep me out of bad trades also.
Hi henry this carrency meter will be a good and power sistem to help me on my trades.
thanks.
Hi Henry
Thank you very much
Dear Henry,
Thank you very much.
Hi Henry,
Thanks so much for sharing the CSA V 3, it is a great & must have tool. I have been following your tradeable advise & I must say that the results have been impressive, to say the least, however, have a question with regards to Aug 26, 2011 US GDP Prelim release, why is 2 different currency pairs being used, i.e. long USD/JPY if USD positive & long EUR/USD if USD negative instead of just long USD/JPY or short USD/JPY depending on the data or Long or short EUR/USD instead? Many Thanks Jane
Jane: This seems like a question to ask on my other blog. But the quick answer is that JPY has a potential for weakness in the event of a strong USD demand, and EUR has the best potential of strength in the event of USD weakness… the sentiment is based on long-term and short term fundamentals.
pls henry
i downloaded the older version of csm. but up till now i dont know how to use it. pls can you send me a mail containing instructions on how to use it
thanks a ton.
where is the link to download CSM, i cant find it
wow … when i posted this and the screen refreshed it was there … the powers that be i guess … great service
HI Henry Liu, Thanks so much for your good work.
Am trying to install the csm 3.0 and it give this error ” The cabinet file_’BC2150007804BA865C34DDB4766 required for this installation is corrupt and cannot be used. This could indicate a work error, an error reading from the CD-Rom, or a problem with this package.
Kindly advice and thanks
Emmy
Please redownload the file, it seems maybe your internet connection is not stable and the file you downloaded was corrupt.
Henry, u r the best, tanx for sharing all info with us, God bless u
if it perform all that you have enumerated, then it simply amazing but let wait and see!
Hello Henry
This is Prathesh from India,I hope it will be a revolution for new traders like me,
Thanks a lot
Pratheesh
Hello Henry. this is Amir from Malaysia.
I really want to say thank you so much! because you are helping me for my future life.
You are the greatest trader who is helping for every traders.
Thanks for the CSM v3! it was so awesome!
I have been using your market news also information offered from you with great success.
I am a beginner how ever i am familiar with MT4 . but always seeking looking for more update easier information to currency trading
Henry. Great advocate of your news service. Been with you some time. You do a real great job. Have downloaded your currency meter, version 3 as per your installation instructions. Sure it appears on my desktop but no information comes up for the respective currencies-the ticker works but there is no feed of information for the strength factor of each currency. All I see is a blue box under each currency which is blank and the news section is permanently set at zeros. What am I missing? I have reinstalled, I have confirmed registration but still not working.
yes, please send me an email with screenshot and your Windows version, also include if you are using any antivirus or firewall.. I am trying to get to the bottom of this. send your email to henry at newsprofiteer dot com.
Thanks,
Henry, just downloaded CSM 3.0. Impressive! I used the old version with MT4, but had to stop as I stopped using the platform. Making a free-standing version is exactly what I had hoped for. Many thanks (also for your news trading signals, which have made me many pips!).
Hi Henry, really like your CSM. Wondering if it will be useful to add a function that can plot the numbers in a chart. So when the reading is 5 for example, we can know it is from a reading of 2 or from a reading of 8. In other words, we can tell it is getting stronger or weaker, relatively.
Many thanks for providing CSM.
Hello Henry. Thanks for ALL your help offered in your e-mail messages, especially the CSM V.3 & the associated instructional information. I enjoy them all. Respectfully, J.E. Walker.
Hi Henry,
I downloaded the first currency strength meter and that works fine but when I downloaded version 3, it does not seem to be working. The numbers do not work but the news underneath work. I can read the news but I cannot see any numbers changing at all. Please help.
Can you send me a screenshot and tell me what Antivirus/firewall you are using, plus what is the version of your windows?
send them to henry [at] newsprofiteer dot com.
I appreciate it.
i look forward to testing out your new meter.
i used to use version 2 but it used so many system resouses i had to stop using it.
hope you have solved this issue.
thanks for spending the time and money on this neat FREE tool.
Thanks Henry!!
How come I’m getting a notice that your download could harm my computer ????
Because it is an executable. Any executable may be considered as harmful by antivirus programs… you just have to trust the source. Of course, feel free to scan it with an antivirus program, you’ll find it is ok.
Henny,
Where is the download link for CSM 3.0? It did not appear after video presentation.
Thank you
Here is the link:
https://s3.amazonaws.com/csmeter/Currency+Strength+Meter.msi
Hi Henry,
I’m brand new to this tool and resource, but I have a good feeling form what I’ve heard about it so far and obviously I will need some level of training to properly use this.
I also wanted to thank you in advance for allowing people like myself to be able to get access to such a invaluable addition to my investment program with this meter and look forward to using it to help me get where I want to be financially now and in the future,, thank you so much for your sharing of it.
If you are new, I’d recommend to watch the 7-best uses video.
http://www.currencystrengthmeter.com/76/7-best-uses-to-profit-from-currency-strength-meter/
hi
Yesterday I installed your CSM 3.0 meter, but there is some problem because it can not be seen at any scale and does not display any range you can help me solve the problem?
Not sure if I understand you, but if the numbers are not showing, did it ever show before? Try to restart it and see if the problem is solved.
If not, please send me a screenshot and let me know if you use any firewall/antivirus program, and the your version of Windows. I am gathering information to do a major update.
Don’t forget to get Bonus #2, it is LIVE as of now.
Henry, ur the BEST, THX
hi …..this is the great tool …..I think if this tool give the currency strength percentage (%) in different time frame then that would be a great horizon for this tool….
I did not believe that somebody can render valuable tool for absolutely free like u did. I have lost so much in forex since 2007, till the point I decided to give up . With this meter, I look for a way of funding my account, because since I would able to identify trend of the market now.
God will bless you Henry.
Hi …this is a great tools….I think if this tool give the strength percentage(%) in different time frame then it will be another great horizon ….
First off all : THANKS HENRY… great tool ¡¡
Yesterday I installed in one of my pc the new version and worked ok… today I installed in a 2nd pc I have and it does not work all info properly on this pc… ( never connected both at the same time, any hint on this issue will be apreciated, once again, thanks for this great tool ¡ Hector.
Not sure why you have this issue, but there are some known bugs that I am looking to fix. Will release a fix soon, and I will post it here as soon as it is available.
Thanks! A really useful tool always on my screen.
Vittorio
Thank you for your csm
Well done Henry! the CSM V3 is very excellent improvement, suggest, it would be very perfect if the News Alert could display the trend direction.
Cheers
Hi Henry
Thanks for all the good staff.
Regards Bill
I am glad to have currencystrengthmeter 3.0 to better my trading.
Thanks alot .Henry.
Hi Henry, Thanks for your newest currency strength meter. However I am also getting just a blue background with no numbers appearing and no scrolling news at the bottom. Help please? Jules
Yes, I have been getting numerous reports on this issue. I will be releasing a fix soon. Thank you and everyone else for letting me know.
Hi Henry,
Thanks for V3.
I have deleted V2 and installed V3 however I am not getting the strength numbers.
The Meter is showing the “scrolling news” and the lights do come on and off for the opening and closing of the markets’ ; its just that the Strength numbers are not coming up and I just have the Blue background.
Also the News window provides no information.
Can you advise what the problem might be?
Many thanks
Thank you very much for all your support. Is not many people like you..Thank you
very nice work henry at the beggining I thought another scam artist I am long time in forex and see a lot of things 99% of that pure scam. After download your tool and see how it work I can say thatis very very benificial. Thank you Henry
Hello Henry,
first of all many thanks for the great job you’ve done. Although I wasn’t that much satisfied with V2 it seems the new CSM is much more accurate. However I still have a little problem with it as it is reported by some others already. Everything is working fine exception the timer for the upcoming news and the field for “Expected:” It’s running on WIN XP SP3, Antivirus is ClamWin. All is up to date! Would be nice to get it fully to work.
Thanks again!
I have been following you for quite some time. I am going to try the strength meter, You will get a feedback soon
Hello Henry,
Was waiting eagerly for the CSM version 3 for a long time. Just saw it and your explanation of the uses and new features. Mate it is awesome. Everything I expected and more.
Will put it to use and I am sure it will help with my trading immensely.
Thank you very much mate.
Warm Regards
Dil
Brilliant, Brilliant, Henry you can start you own news service with this along and I am a fan, good stuff.
Thanks so much 4 ds free valuable tool,i’m new to forex trading so a friend gave me the link but i tried to download the 7best uses of the 2nd version so that i can realy sit down with and get all the juice in it i tried it 4 upto 10times and i cudnt.Pls can you help me out.Also this new one i couldnot download it wat should i do,pls.
Thanks for your response in advance
The 7-best uses is not downloadable, you have to watch it on my site… What seems to be the issue? You cannot watch it?
Hi Henry,
Can you offer any help please I have tried to download your video both on my main computer and laptop both without success. It’s almost impossible to listen to the video on your site because of breakup I’m just about at my whit’s end to know what to do next. Thank you for any help you can offer.
What happens when you Right-Click on the “Click here to download video” and select “Save Target As”? Do you get a download window? What happens? I don’t know if this is my server issue or your PC issue… Please specify. Does anyone else have the same problem downloading the video?
Tried to install today and I get the error Cannot find flash.ocx.
I am running Windows 7 Ultimate 64bit, tried to find a solution on the internet but can’t seem to find one. Any help you can give would be appreciated.
Thank ya,
E.
Hy… the colors don´t work
it´s always red
but thanks anyway for Currency Strength Meter 3.0
Can you send me a screenshot? I like to see it.
henry [at] newsprofiteer dot com.
Thanks,
Yes,, the color don´t work,, but the tool is very good
The values (numbers) on version 2 is slightly different from version three. Any comments or contributions ……….,anyone else experience same or is it just myself. Which version depicts a more accurate picture of the currencies strength ?
Yes, I use more pairs in the V.3 and also it has a weighted formula using BIS… and of course, the server time is based on normal Forex time, so I would expect to see some differences with different brokers.
Thanks Henry
I will try it and come back to you with an opinion
Thanks again
Henry! you are the best. Thanks
Again, I am very impressed with your service, your products, and your willingness to assist traders with good free products. Most anything free is junk. But, your new CSM is very useful. REGARDING AN ACTUAL NEWS RELEASE: Here’s when the CSM will be unparalled and your service the “undisputed champ”: when via the CSM you send 1) the pair to trade, and 2) the “buy” or “sell” signal…real-time. Keep up the good work!
Thanks for the free upgrade Henry. Have used the old version for some time and loved it. I expect the new to be awesome.
hi henry,thanks so much for your kindness and for the passion you have to help other fellow trade to success in there forex trading.and i will be expecting your trading room open,cheers.
Hi Mr. henry,
Thank you for the new release of the CSM i have been using the Old version and it has been givening 85% of success and the remaining 15% from your analysis, i don’t miss that analysis.
I have been lossing alot before until i get to meet you on facebook after then i have been picking up and getting better. I hope to huck up with your traderoom it just that your time and Nigeria is different hope i can meet up.
thank you once more
How do I oder the product.
Thank you
James S Massey
I will post the details next week on this site. Thanks.
Hi Henry,
i just want to use this opportunity to say a big thank U for developing the CSM both the old one and this new version. It has formed part of my integral trading tools. And i can’t quantify here how much this innovation has helped me. Thank you so much.
Regards,
Sam Ikedum
Hi Henry,
Thanks for the new CSM. Installed without a problem on my Windows 7 machine. I can see, that with the news reader, you must be headed for a News Trading Autotrader (hopefully). And why do you restrict the news result with a delay? That is why I suspect you will have a paid version with extremely fast news result, but hopefully an EA connection or somethother other way to make the news trade automatically.
Thanks again,,
Jim
No, that’s not it. To achieve instant news delivery, I will need to set up at least 5 servers to cover different regions for optimal delivery… and I am not ready to spend that kind of money yet. But that’s definitely a good idea… however, CSM will always be free.
Hi Henry,
I’m sure I’m gonna love this tool – the only slight problem is that I don’t see the actual currency strength data – just a row of blue squares. I’ve tried it on my desktop PC and laptop, and I get the same non-display. I’ve tried waiting for a while in case it needs to download some data on first-run, and I’ve rebooted it several times – but nothing appears , nada, zilch
Any ideas mate ?
Can you please send me a screenshot to henry [at] newsprofiteer dot com? I will have it analyzed.
My dear Henry,I appear to be facing thesame problem with my installation as expressed by one Chris on this page.The figures are not showing on the currencies,the timer is not ticking, n othing on the ‘Expected’ on the News section,but the News Highlights are rolling.I also use WindowsXP on a strong Broadband Internet connection.There is no Firewall or Anti-virus interferance.Pls. help me Henry.I must join your club!
Thanks.
Please send me a screenshot umar.
henry at newsprofiteer dot com.
I will look into it right away.
Hi all…I had used this existing CMS for quite sometimes. The system really good for beginner and can assist you to make entry. Its wonderful so far. Thanks Henry you done something dam good. bravo
Same situation as David below describes: numbers changing, color not. In your “7 bests uses” video you say that CSM is gathering data and after some hours…
Can I assume that colors will start to work after that period, or is it just some small bug to be repaired?
I did not find any mention about this behaviour (except, perhaps in that video)…
Well, if the number is below 2, it will show blue.
if the number is above 7, it will show red.
if the number is above 5 but below 7.1, it will show orange.
and if the number is above 2 and below 5, it will be yellow…
If you have a number 7.2 and it is still orange or yellow, please send me a screenshot. That is very rare.
henry at newsprofiteer dot com
Hi Henry, thanks! One problem- I can’t move it. I run Vista and the thing is stuck to the dead center of my primary monitor. I’ve uninstalled it it, V2, then re-downloded, reinstalled and it’s still stuck there. I’d appreciate some help and am looking forward to learning this new tool.
Lee: just move your mouse to the title bar of the meter, then you can drag it. The title bar is white horizontal bar across the very top of the program, it is the white space above the banner.
Click and drag it anywhere.
Sheesh, thanks! White on white…, I was clicking in the center…, great stuff, Henry!
It could been an oversight on my part – sigh*, I thought white looks better, but it is actually confusing to some people… Should just stick with a windows blue title bar.
Hey Henry,
pretty exitedet about changing skins so easyli . Right knwo it doesnt shows the next news, and the strenghts meter are not activ, but the numbers changing. hope this is correct setup.
Ah, now i got an Alert to Dismiss last News. Awesome Work, well done!
Hi Henry,
I have never left a message before, but I just have to say that the CSM 3.0 is amazing, alot more smoother with alot of great features that just work so well. I think you have honestly outdone yourself.
So thanks a lot, seriously, thank you
thank you so much. your CM and trade analysis has helped me a lot in my trading. thank you once again
Wow something so GOOD for so little – FREE. Maybe there is hope for the world yet. Looks like a great program and some nice updates, many thanks Henry, looking forward to useing it in action. Keep up the great work and God Bless.
Henry,
Thanks for the meter, looks like a valuable tool.
Keep them freebies coming.
lb
Hello Henry,thank you so much for this tool,i ve been using V2.0 for one year,and simply cannot trade without it!V3 is great!i have problem with alarm settings,for example now usd is 3,10 ,i tick usd and then operator <
and value 4 but it doesnt ring!do i do something wrong?
I found out that when i set for > it rings but it doesnt when i set for <,mayby i am missing something?
I’ve double checked, it works, can you describe in detail exactly what you did to cause it not working?
Hi Henry,it looks like the colors dont change and its red all the time,and if i set an > alarm it rings even if the value is not bigger than the set value.in the opposite if i set a <alarm it doesnt ring at all…i used it in windows 7,thanks:))
Thanks for yr hard work, this is an amazing tool.
God bless
Hi Henry,
Great work & Many Thanks for sharing the CSA. I love the added feature of the CSA V 3, however, I was wondering if the size (in particularly the width) can be reduced to the same as the CSA V 2, reason is I always have it on the upper right hand side of my PC but with CSA V 3, the width is larger & if I place it on the upper right hand corner of any corner of my chart, it covers important part of MT 4 chart & hence I could not select the feature of always having it visible which I would like? That would make a great tool even more perfect!!! Thanks again for sharing. Jane
Next to the upper right “X” there is a Pin, just click on the pin and it will stay visible always.
I liked the simplicity of the 2.0 version. Is there some way to opt out of the various new parts of 3.0.
It has too many gadgets. It is confusing to me…too much to look at. What happened to KISS?
You can definitely keep using the 2.0. No need to upgrade if you don’t want to.
Hi Henry…I have tried to download your latest version of the Currency Strength Meter from your recent email but continually get a message that tells me that the file could not be downloaded. Even the video explaining the workings of the Meter will not play correctly without continually stopping and starting. So I was wondering if you have another site/link that will allow me to download the Meter and tutorial without the problems I am currently facing. Many thanks for your anticpated assistance. Cheers from ‘DownUnder’ here in Australia.
Here is the download link:
https://s3.amazonaws.com/csmeter/Currency+Strength+Meter.msi
Here is the video link
https://s3.amazonaws.com/fnta/launch/csm-video.mp4
Thanks for your free csm, at what particular time do you take an entry? because you may be taking an entry too late or during reversal. I believe you dont just see a strong and weak currency pair and as a result make an entry. Please clarify.
I would refer you to my 7-best uses video on my meter website for more clarification.
http://www.currencystrengthmeter.com/76/7-best-uses-to-profit-from-currency-strength-meter/
this is so great henry
Dear Henry – thanks so much.I have not opportunity to tall you thanks for previous version but now
even with my bad english,like to say that i am proud of you and hope that it is no last product which will
reveal for us poor dummies on field of forex.
brgds
mike
Hi Henry
This CSM is simply wonderful and the work of a creative, techno expert, which is what you are! The addition of skins, news flashes and alarms — gee I’ll try them all! I’m sure they can only serve to enhance my trading and alert me to economic data coming out. Thank you so very much. I can now close the MT4 account that I was forced to keep open because of CSM2 requirement. Incidentally, what exactly is BIS?
God Bless Henry.
C.C.
Bank of International Settlement.
Thanks Henry, Very Promising.
Thank you Henry and may GOD bless you with more insight and ability to assist others!
DEAR HENRY!
AS YOU KNOW, TRADING IS VERY HARD WORK FOR THE EXPERTS AND ALMOST IMPOSSIBLE TO
FIGURE OUT FOR THE AMATEUR.
ANY HELP, SPECIAL FREE ONE, IS SO MUCH APPRECIATED BY US ALL.
SINCERELY
LOUIS
Hello Henry, i am glad you are here to help people succeed . i am proud of you and hope that you and your team would continue in good spirit to help up coming traders like me.
Regards
I notice that the numbers in the new CSM 3.0 have different values than the CSM 2.0. For instance the 3.0 version states that the USD has a strength of 5.10. However the 2.0 version states that the USD has a strength of 4.30
What is the reason for this?
Are the figures in the new version more accurate than the figures in the 2.0 version?
Thank you
V3 uses more pairs, it also uses BIS settings, and it uses correct time calculations. So it is possible that you may have different readings. That’s one of the reasons why I decided to move away from MT4 because every broker is different.
Thank you very much Henry,
How generous of you!
All the best,
Larry
Thanks a lot Henry, will put it to good use.
hello henry. i just download the csm and it looks wonderful. i havent tried it yet. but i wish there were more henrys out there helping the newbies as we go through extreme pain learning this wonderful trading business
by ourselves as alot of trading courses cost way to much. and its great to get freebies just like this one. every little step helps us. thank you for your gift. now i must go and put it to the test. god speed.
thanks sir, i just downloaded csm 3. i observed that csm 2 and csm 3 are showing different values for currencies while running simulteneously. so which value of the currency to be considered as true and factual. it is creating doubt in my mind. pl calrify whether i should remove csm 2 from my pc. thanks
Yes you should remove V2.
V3 uses more pairs, it also uses BIS settings, and it uses correct time calculations. So it is possible that you may have different readings. That’s one of the reasons why I decided to move away from MT4 because every broker is different.
Big!!!Tool can’t waite to put it into practice
Always did like the meter… now it’s even better. AND with the addition of the news release alert ROCK-ON Henry!
Good job Henry,you’re doing a great job.Thanks for the time and effort you have put in to make others succeed in trading forex.
Please can it enable trade for you automatically on your account?
Bye
Not really… This is not an automated robot by any means.
Fantastic tool, Henry and many thanks for your generousity ! Can’t believe its free !!
I was wondering instead of having to monitor the CSM most of the time, is it possible to add an up or down arrow beside the respective currency’ color ? So for example if I see an orange or yellow USD with a down arrow, then I will know immediately the USD was previously at a higher color and this could mean either a pullback or a potential reversal.
Thanks again, Henry.
There is an alarm function that could do something like that… Since you can setup different alarm settings, you can just enable the right one depending on where the market is right now… Let’s say that Alarm 1 is when USD is above 6.0 and Alarm 2 is when USD is below 3.0. You can enable Alarm 1 if the USD is below 3.0 and once it hits Alarm 1, you know it moved from low to high.
Can I download the CSM instruction video to my computer as I find it impossible to watch. It keeps breaking up.
Thank you for any help you can offer Ted
I will see what I can do with that… I will post a link perhaps tomorrow to download the CSM intro.
Thanks a Lot!!
i also don’t get the download
Hey Henry,
I appreciate all that you do. I am trying to get this download but all that i am seeing is Please wait. Download link will appear below… Any suggestions?
Thanks
Corey
Did you play the video? Are you using a MAC? Is your browser compatible with Flash?
At any rate, here is the link to download it:
https://s3.amazonaws.com/csmeter/Currency+Strength+Meter.msi
I have been using the version 2.0 and it is great. The new & improved version seems to be a much better tool.
My skin that I have displayed gives me the hrs & min only shows partial. Is there a way to expand the new currency tool since the skin that I am using is the bottom right which shows the bars & meter as when as the streaming news. But the time screen is only shows partial.
Thanks
Mark
Can you send me a screenshot, I will see what I can do to fix it… But it is showing fine on my screen though. henry at newsprofiteer dot com.
Thanks Henry . . . . .Awesome tool!
Thanks Henry….I’m looking forward to using this new version.
Thanks for the update Henry. Always look forward to your pre news analysis emails.
Its a cool tool.
Thanks Henry.
Hi Henry,
Your version 3 of CSM is really great with all the new features you added.
Thanks a lot.
Thanks Henry for the new CSM 3.0 god bless.
Hi, Henry.
Look excellent; better than ever. I had using the 2.0 from the beginning with less stress at entry time. The new one, look like a Bentley cabriolet with full extras.
Thank you so much, for all the effort and dedication that your putting to help others.
Cheers & happiness
please hector, can please explain to me how you used the 2.0 so that me too can benefit and beside i was unable to download the 3.0CSM due to my system compatabilitty or can you be of help???
This is going to be a great tools.
Thank you
Thank you everyone for your kind comments. If you really like this meter, please share it using the social buttons that is floating on the left… I really appreciate it!
Hi Henry, thanks very much for this update to your very useful currency meter!
Thanks Robin Hood.
Its called increased education.
Hi Henry.
I can’t wait to give this a try. Thanks for always giving us new tools to help us trade.
Hi Henry,
thanks alot on your generosity to share such a valuable product with us. It can really help every trader no matter what trading system he/she uses. I’m vey excited about this new version since I have been using previous version very successfully.
Best regards and keep your mission,
Mile
Thanks for CSM 3.. out of curiosity i had CSM 2 and CM 3 up together to see the difference and I noticed that they are showing different strength. Why is that so?
It depends on how many pairs you have on your station and the server time that your broker uses. I use over 35 pairs in the dataserver and I use correct time, from 5:00pm EST to 4:59pm EST, which is what a normal Forex day is.
And don’t forget, the new BIS setting that was added in this version.
I like your new meter and it is nice that it works with out a mt4. That is a big improvement.
Thank you
Everett
THANK YOU SO VERY MUCH – You are phenomenal, obviously driven by your passion, and unbelievably kind hearted, Henry. Blessings to you in every way, and many thanks.
I am currently viewing this on my Ipad 2 and was wondering can I download it using my IPad 2? and or my Mac Book Pro
Maybe on your MAC if it is setup to run Windows programs, but I doubt IPAD2 would work… I may actually make an app out of it in the future
It sounds like just what we all need! just what the Doctor ordered. Thanks
this is very very good infarct i have been waiting for it long time,because i have lost all my money
with marketiva can you imagine from $15000 down to $21 only balance in my platform,how i wish you came up with this 5 months ago, nevertheless i think is time for me to take back my money.
Hi Henry, i just loved the origional CSM and can’t wait to try out this new version.Thank you so much for this wonderful application.
i will be happy if you could please help us by send us the uses of CSM in an email or PDF format
THANKS
Hi Henry
I just downloaded the CSM 7 best uses. Now am I doing this right. I just took a sell trade on the NZD/USD pair, based on the fact the CSM was showing at the time an Orange USE at 5.00 and a Yellow NZD at 3.00.
Was that the correct way to apply the CSM?
Sheldon
Yes, it would be, but I would probably look for a slightly bigger difference in the strengths for entry.
Henry, thanks for your excellent indicator. I just installed 3.0 and crated an account successfully. When I ran the program, I see next upcoming news timer but no numbers on all currencies.. it’s just blank with blue back ground.. is this something normal? or i did something wrong?
no you should be able to see the numbers, if you don’t, then there should be some issue with your installation. Could you please send me a screenshot to henry @ newsprofiteer dot com? Thanks.
Hi Henry,
I have exactly the same problem. I will email a screenshot also.
Thanks a lot for such a useful tool..
Great work!
Feature request:
A history chart would be a great addition for identifying trends even better.
An oscillator would do the job I guess. Different timeframes would be desirable too.
Thanks for your generosity!
Glad for the removal of MT4 dependency..
You are a very generous person. Good things will come your way.
You’ve reached another new height Henry!
Where will it all end?
Congrats. & well done!
Henry I loved the previous version of your CSM. Just finished watching your video on the CSM 3.0 and can’t wait to get into the new the new version with all the Bells and Whistles. Thanks so much for providing this wonderful tool and for free too. Happy trading. Regards Roly
Hi Henry,
The new features look really cool! Am excited about giving this baby a thorough test drive.
Thanks so much for the time and effort you put into this.
Thank ya….Thank ya very much
E.
Sounds interesting Henry. We Traders can use all the help we can get to be successful. Thanks.
THANKS SO MUCH FOR THE FORMAL METRE IT HELP ME A LOT IN TRADING WHEN THE MARKET IS TRENDING. ONCE AGAIN I SAY THANK YOU
Hello Henry, thanks for this new version, and ESPECIALY for the count-down clock for newsreleases.
Couldn’t master newstrading because of the different timezones…. now i can…i hope.
I used the previous version of CSM, and i did wel with it. But, (stil in mt4DEMO), most of the times i lost
my money because of these news-traps.. Not mastering to know when the news “jumped in”, many times
i have burned demo’s. Al these different timezones, and converting them to my local time was extremely difficult. Now these days should be over, or isn’t it ?
They should be
I hope there won’t be any bugs with the timezone, but if there are, I will fix it right away.
Hi Henry,
The Newsprofiteer V2 has become the main tool in my trading decisions, so V3 being an improvement, will continue to be just as important on all my future Forex Trades.
Wow Henry, you have really out did yourself & over delivered yet again!
Thank you so much for all your generosity!
Thanks Henry, I look forward to trying it.
You are one of the few genuine experts that wants to help us beginners.
I let you know how it goes.
Yours
Ron
I have watched your videos of News based trading and I am interested in your trading room. I hope that the charges will be nominal. I have lost lot of money. Appreciate your freebies. Thanks!
Hi Henry. It looks fabulous. What I would need is an interpretation of the colours and the numbers. Thanks again for your present
Red – Strongest
Orange – Strong
Yellow – Normal
Blue – Weak
It help quite a bit in trading forex.
Hey Henry, been following your news reports etc.. and Now with the new CSM wow!! sounds and looks great thanks mate
Cheers
Words can’t express my gratitude. Thank you Henry for making such a priceless tool available free. Keep using that remarkable head of yours to create life changing products.
Thank you Henry seems it will be very useful tool
You done it again Guv’nor. Top man and many thanks to you.
Two things though.
Do I need to delete Version 2 for compatibility probs. And is there a way to move it around the screen.
Downloaded fine, was running the two together. Closed both off, then couldn’t open V3 again!
Any ideas?
You should delete V2 and then install V3.
I would recommend to uninstall both, then re-install V3 again.
Here is the instruction for installation:
http://www.currencystrengthmeter.com/78/currency-meter-installation-guide/
That worked okay V3 running properly now. Thanks.
The other thing though, It would be nice to be able to move it around the screen. I normally have it either top or bottom so as to see charts more easily.
?
Henry,
I want to come and see you I am always apprehensive with your offers they are so good and free. Yes I want to see you to see if I can see the catch when I’m closer to you. Paul
A very good tool to trade forex indeed. I appreciate to provide even free. Thanks
Thanks Henry, I can hardly wait to try it out!!
Hi,Henry I really want to trade news with you tell me how I can do that?Thanks you for everything you do for us.
Well, I will be posting more information on the traderoom here, so stay tuned.
Henry,
Thank you very much for this. I know this will sound very cheeky, but will it be possible for you in a future update to include a charting facility with your meter, just like Tom Yeomans does with his extortionately high priced version? It’s the only thing he’s got over yours…. for now.
Best regards,
Ian
I think simplicity is the best, that’s why we are using just numbers… I don’t really know what kind of predictive value CSM has by showing historical strength/weakness… To me, the CSM is meant to give me invaluable information for “right now”…
I understand and ultimately I cannot complain, because what you have provided is wonderful. I’ll tell you my reasoning behind asking for a charting facility:
Yeomans contends that strength/weakness moves in a sine wave pattern and if it completes this pattern by reaching an 8 (high strength) or 2 (low weakness) then there is a very high chance of a reversal. This is similar to what you shared in your ’7 uses of the CSM’ video awhile back, but the difference is Yeomans looks for a steady progression up to an 8 and down to a 2, which can only be seen in visual form. It’s not the same as a sudden burst of strength or weakness on a currency following a news release for example.
Anyway, it was just a suggestion and please take it with a pinch of salt.
Best wishes,
Ian
Henry…Thanks for all the info and the meter…I like a lot of other people lost my retirement and Thank God for SS.and your meter…I am finally able to make a few dollars to help our budget..I do have one question tho and that is sometimes the meter shows the trend should go one way and the price is actually going the other way…What causes that??..Ed
That is rare since the meter scans all currency pairs, it should not show a weak currency as strong. Of course, some pair weighs more than others, as a strong AUDUSD pair has more weight on the AUD than GBPAUD pair because AUDUSD has more volume… this is based on BIS report.
Many thanks for the updated version. Version 2 was a God send. This looks even better. Many Thanks
Thanks Henry, I have just downloaded the meter and still have to try it out, I am sure it will be very helpful. I enjoy your e-mails and find them to be a great help. I appreciate the free help and inspiration.
Thanks once again
why can’t I get the Bonus #2 to open up or download? I have downloaded the free CSM 3.0
Bonus 2 will be available on Thursday… Still getting it ready
thanks Henry
Hey Henry,Been using the SM for a while and trading is so much more consistent with 80% successful trades.Thanks so much from Cape Town,South Africa.
Thanks Henry for all the help, it is very much appreciated. You are the man!!
Thank you in advance for providing this program. I have followed your emails for some time and found them to most helpful.
HI HENDRY
WHEN MARKET NEWS IS BEING RELEASED 4 TO 5 TIMES A WEEK, WHERE DOES ONE
FIND THE INFORMATION BEFORE ONE PLACES A TRADE BY NEWS.
You can now get that information through the meter… isn’t that wonderful? However, the meter only broadcasts on the news that I trade, but to be honest with you, all the other releases are probably not worth your time, so better stick to the releases that I trade and use the meter to trade them.
Thanks Henry. I have not utilized v2 but I am looking forward to the v3 to see how it works. You’re very kind to give this to us for free.
Hi Henry,
Great tool! I’ve used your earlier version before and it was really good. This will be stellar.
Is there a way to enlarge the meter. The #’s that appear on my new meter are a little squished.
Thanks, Rebecca
because of the new skin function, the resizing is no longer available. But I will make some more skins with large numbers… give me a couple of weeks or so to get it ready.
You’re awesome Henry!
The new CSM is fantastic,I like the alarm settings
i am so happy u still got the heart to help traders do better in forex, for these i must say thanks a million and keep up the good work.
Thanks alot Henry!! I use V2 everyday and truly appreciate your generousity. As a technical trader though, could I offer a suggestion? The meter works extremely well for knowing trend direction and finding mismatches, but could be improved by being able to focus on specific timeframes. I have another currency meter that does this, but it is graphic, a resource hog, and not nearly as pretty:) I found it on a public forum so it should not be a problem sending it to you if you want to analyze the code. Believe it or not, it does identify each timeframe’s unique strength so I know the effectiveness of such a tool…from a technical perspective. Just an idea. If it doesn’t fit your plan, it is quite alright. I obviously cannot complain about a free tool:) and it is still very effective for navigating the market. I look forward to using the new version with the additions. Again MEGA THANKS!!
Sure, send the link to me at henry [at] newsprofiteer dot com. I will check it out.
Thanks Henry, Can’t wait to try it!
Hello Henry,
I use your Strenght meter for every trade that I make, version 2.0 was great ! But I think this 3.0 version will be even better to make more profits and above all with your CSM you know exactly which pairs NOT to trade.
Great service Henry, I really appreciate this opportunity for this free download. I am also happy to receive your news updates which have big impact on trading forex. Thanks!
Rene
Thanks henry really appreciate your help,for new comers specially been burnt with so much marketing junk out there want to really thank you for great work that u do to help traders ,if u get chance is there anyway of u teaching us price action and drawing trendlines /support and resistance lines with fibs etc ,to really trade this way ,would be most obliged
thank you again
I may consider that for the upcoming webinar, which is tentatively scheduled for the 29th of August… Make sure you signup for it, I will provide details of registration here (in this website) before the end of the week.
where and how does one sign up for it?
I will post that information once the webinar is set, latest by Thursday.
As always thank you very much Henry. You are a true champion, always looking out for newbie traders and those needing your expert advice. God bless
I installed your new meter on two different computers but I still cannot get it to work. It does not display the currency strengths – no numbers? Please help. This thing looks awesome! Thanks in advance.
You need to have Internet Connection since it is getting price updates from my server.
Also if you have overzealous Anti-virus program, you need to allow exception for the meter software.
Let me know more about what is working and what is not, also send me a screenshot so I can get it analyzed. Are you getting the ticker? Does the News Tab expand out? Do you see the upcoming news? Do you see the banners? A little more information could help.
Also what version of Windows are you running? Is it up to date? Do you have any anti-virus? Send me a screenshot.
I have broadband 24/7 internet. I use Avast Antivirus and put in as an exception but still nothing. I cant upload a pic on this but will send to your email. Im running Windows XP – is that it?
No it should work fine. Do you have the latest version of IE? Do you see ticker? Do you see the news tab? Send me email at henry [at] newsprofiteer dot com
Dear Mr. Henry
I like your enthusiastic and your hard work to help trader
I just want to thank so much for what your had done
I will send you same more comment when I have see how the trend meter determine the direction
Lina Kay
******@****.com
Thank you, I removed your email address so that you don’t get spammed…
FINALLY!!!!! I’ve been waiting forever for this. Also how do I gain access to your trading room? Is it free? I love hearing how you analyze the charts. I’ve miss you putting out video…..but a trade room is even better. I can’t wait!!
It’s not free but you get so much out of it that it will be a huge bargain, I promise
Henry,
thank you for so cool stuff, I am already exited without even testing it, I will let you know how it does after starting using it.
Regards, Carlos.
Hi Henry,
I have used your meter every day that I trade. It helps put into perspective whats going on just at a glance.
Keep up the good work and look forward to hearing from you about the news!
Rick
Sounds like you have done a lot of improvements on v3. I really like that fact that you removed the MT4 dependence.
Keep up the good work!
thanks,
Charles
It wasn’t easy but a much needed addition… I plan to add more functions in the future, including perhaps an audio broadcast feature to broadcast news releases… But that will be for 2012 or later.
Excellent work Henry
I have been using this for some time and am never without it
Can you inform me when the trade room is up
Thanks
Absolutely, you will receive the links to my other bonuses in email, I plan to release bonus 2 by Thursday and then Bonus 3 on Monday 29, so just watch out for my emails and I’ll make sure to give you plenty of time to join.
Traderoom will be open for registration on the 30th of August, it will officially start on September 1. But if you attend the upcoming webinar, I will give you a special bonus to join the traderoom… watch out for my emails this coming weekend.
Henry I really want to trade news with you tell me what to do aap.
what about Mac users?
Thanks
I am sure if you can run Windows within MAC, you can run this program… I am not a MAC user but I know there is a workaround… But that’s beyond my knowledge.
i am having difficult downloading the software. can you help
the download link is right under the video. Right-Click and then Save As…. It should work fine.
Hi everyone: I’d love to hear from you, let me know if you enjoy my latest version of CSM. And a quick tip, since CSM is connecting to a central database server, it needs a few seconds to get data, therefore do not change skin during the first 5 seconds of launching CSM… You can change as much as you want after the first 5 seconds…
Dear Henry – thanks so much for the great work doing for the forex trader . i will like to know how to use this your latest version.
Its basically the same usage as previous versions. I would suggest that you watch the 7-best uses video, everything still applies. I will be making a new video soon on CSM, but it would probably be a couple of weeks.
Here is the link to CSM 7-Best uses:
http://www.currencystrengthmeter.com/76/7-best-uses-to-profit-from-currency-strength-meter/